With almost every Apple watch band picking up instant popularity, it was understandable to create some awareness about their maintenance. No matter if you have purchased a shiny new stainless steel Apple watch band or an Apple watch black sport band, it’s about time to maintain them with material-specific steps. To make your Apple watch band more fashionable and sustainable, we have a few steps according to the type.
We’ll primarily focus on leather and stainless steel, as these are the two that require the most attention. Let’s start with leather.
Maintaining the Apple Leather Watch Band
Leather has been one of the more premium Apple watch bands. We have got many questions about its maintenance and sustainability. Since the demand for leather suggests as to figure out a way, we are here with the following points.
- The routine for regular cleaning
Apple leather watch bands should be cleaned regularly. But keep one thing in mind, leather is aversive the water. It can deteriorate and catch humidity even if mild moisture stays in the watchband. You can use a hand sanitizer. Put it on a cloth and scrub the watch band on both sides. Make sure that you dry the watch band from any water that might reside on its surface.
If you see heavy stains on your leather watch band, use a homemade mixture of water and baking soda. Form of paste with equal quantities of both and apply it to that part. After the paste dries, wipe it and let the band dry in open-air. Don’t forget to clean the band regularly.
- Handle the stiffness of the leather band
Leather bands are relatively stiffer than other materials. However, they require a break-in period to get used to your wrist size. It generally takes 2 weeks, depending on the frequency of usage of the watch. If you want to speed this process up, take it off your wrist and roll the band into a ball. However, don’t make a very tight ball; otherwise, there will be freckles all over the band.
- Don’t expose the leather to excessive humidity
Humidity is a leather killer. You cannot expose your leather watch band the moisture in any case. So, if you need a waterproof band, opt for the Apple watch sport band. This makes it apparent that you cannot go for a shower and wash your hands while wearing a leather watch band. Not that their dial is not waterproof, it’s the band that will take the hit.
Every watch band material has some limitations and advantages too. For example, leather brings in a lot of elegance in your personality. So, if you are ready to take the above steps to maintain leather, go for it.
Maintaining and resizing a stainless steel Apple watch band
Just like leather, stainless steel Apple watch band has its own advantages. It brings in the formality in your personality that is required in many situations. If anyone wants to impress his peers and colleagues, the formal stainless steel Apple watch band is the way to go forward.
On the flip side, the stainless steel watch band doesn’t fit everyone. However, there’s a provision to resize it. So, for all those executive-level employees, that’s good news. Stainless steel doesn’t catch any corrosion so, you can handle it slightly brutally. However, the problem is the resizing of a stainless steel watch band. Follow the steps to achieve the right size.
- First of all, identify the number of links you want to remove. If you’re doing it for the first time, you might wrong with the number.
- It’s pretty easy to remove these links by using a sim remover pin.
- Once you have completed removing the pins, rejoin the bracelet again. Test the size and do the same steps accordingly if the size is not correct.
When it comes to maintaining, stainless steel can be delicate and prone to scratches. Make sure you handle the watch carefully while reading and storing so that it keeps away from any scratch raising material.